本文へ移動
Kanzei米国 / HTSUS

変更履歴

改訂版ごとに、公式原文の変更箇所を比較。

2025-152025-14と比較公開日 このページ 1件
  1. 7228.50.10.20変更階層・上位説明の記載変更横断面が円形又は長方形で、表面を研削し、切削し又は研磨したもの
    7228.50.10.20変更
    2025-142025-15公開日 2025-06-20
    参考日本語訳

    横断面が円形又は長方形で、表面を研削し、切削し又は研磨したもの

    分類の条件を見る

    その他の合金鋼のその他の棒、その他の合金鋼の形鋼及び合金鋼又は非合金鋼の中空ドリル棒 ＞ その他の棒（冷間成形又は冷間仕上げをしたものに限るものとし、更に加工したものを除く。） ＞ 工具鋼のもの（高速度鋼を除く。） ＞ その他 ＞ 横断面の最大寸法が18 mm未満のもの ＞ 横断面が円形又は長方形で、表面を研削し、切削し又は研磨したもの

    Of round or rectangular cross section with surfaces ground, milled or polished

    階層・上位説明の記載変更

    変更前 (2025-14)

    7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:

    7228.50 Other bars and rods, not further worked than cold-formed or cold-finished:

    7228.50.10 Of tool steel (other than high-speed steel)

    Other:

    With a maximum cross-sectional dimension of less than <il>18 mm</il>:

    変更後 (2025-15)

    7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:

    7228.50 Other bars and rods, not further worked than cold-formed or cold-finished:

    7228.50.10 Of tool steel (other than high-speed steel)

    Other:

    With a maximum cross-sectional dimension of less than 18 mm:

2025-142025-13と比較公開日 このページ 1件
  1. 7228.50.10.20変更階層・上位説明の記載変更Of round or rectangular cross section with surfaces ground, milled or polished
    7228.50.10.20変更
    2025-132025-14公開日 2025-06-06

    日本語参考訳は未収録です

    Of round or rectangular cross section with surfaces ground, milled or polished

    階層・上位説明の記載変更

    変更前 (2025-13)

    7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:

    7228.50 Other bars and rods, not further worked than cold-formed or cold-finished:

    7228.50.10 Of tool steel (other than high-speed steel)

    Other:

    With a maximum cross-sectional dimension of less than 18 mm:

    変更後 (2025-14)

    7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:

    7228.50 Other bars and rods, not further worked than cold-formed or cold-finished:

    7228.50.10 Of tool steel (other than high-speed steel)

    Other:

    With a maximum cross-sectional dimension of less than <il>18 mm</il>:

2025-112025-10と比較公開日 このページ 1件
  1. 7228.50.10.20変更階層・上位説明の記載変更横断面が円形又は長方形で、表面を研削し、切削し又は研磨したもの
    7228.50.10.20変更
    2025-102025-11公開日 2025-05-02
    参考日本語訳

    横断面が円形又は長方形で、表面を研削し、切削し又は研磨したもの

    分類の条件を見る

    その他の合金鋼のその他の棒、その他の合金鋼の形鋼及び合金鋼又は非合金鋼の中空ドリル棒 ＞ その他の棒（冷間成形又は冷間仕上げをしたものに限るものとし、更に加工したものを除く。） ＞ 工具鋼のもの（高速度鋼を除く。） ＞ その他 ＞ 横断面の最大寸法が18 mm未満のもの ＞ 横断面が円形又は長方形で、表面を研削し、切削し又は研磨したもの

    Of round or rectangular cross section with surfaces ground, milled or polished

    階層・上位説明の記載変更

    変更前 (2025-10)

    7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:

    7228.50 Other bars and rods, not further worked than cold-formed or cold-finished:

    7228.50.10 Of tool steel (other than high-speed steel)

    Other:

    With a maximum cross-sectional dimension of less than <il>18 mm</il>:

    変更後 (2025-11)

    7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:

    7228.50 Other bars and rods, not further worked than cold-formed or cold-finished:

    7228.50.10 Of tool steel (other than high-speed steel)

    Other:

    With a maximum cross-sectional dimension of less than 18 mm:

2025-102025-9と比較公開日 このページ 1件
  1. 7228.50.10.20変更階層・上位説明の記載変更Of round or rectangular cross section with surfaces ground, milled or polished
    7228.50.10.20変更
    2025-92025-10公開日 2025-04-15

    日本語参考訳は未収録です

    Of round or rectangular cross section with surfaces ground, milled or polished

    階層・上位説明の記載変更

    変更前 (2025-9)

    7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:

    7228.50 Other bars and rods, not further worked than cold-formed or cold-finished:

    7228.50.10 Of tool steel (other than high-speed steel)

    Other:

    With a maximum cross-sectional dimension of less than 18 mm:

    変更後 (2025-10)

    7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:

    7228.50 Other bars and rods, not further worked than cold-formed or cold-finished:

    7228.50.10 Of tool steel (other than high-speed steel)

    Other:

    With a maximum cross-sectional dimension of less than <il>18 mm</il>:

2025-72025-6と比較公開日 このページ 1件
  1. 7228.50.10.20変更階層・上位説明の記載変更横断面が円形又は長方形で、表面を研削し、切削し又は研磨したもの
    7228.50.10.20変更
    2025-62025-7公開日 2025-04-04
    参考日本語訳

    横断面が円形又は長方形で、表面を研削し、切削し又は研磨したもの

    分類の条件を見る

    その他の合金鋼のその他の棒、その他の合金鋼の形鋼及び合金鋼又は非合金鋼の中空ドリル棒 ＞ その他の棒（冷間成形又は冷間仕上げをしたものに限るものとし、更に加工したものを除く。） ＞ 工具鋼のもの（高速度鋼を除く。） ＞ その他 ＞ 横断面の最大寸法が18 mm未満のもの ＞ 横断面が円形又は長方形で、表面を研削し、切削し又は研磨したもの

    Of round or rectangular cross section with surfaces ground, milled or polished

    階層・上位説明の記載変更

    変更前 (2025-6)

    7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:

    7228.50 Other bars and rods, not further worked than cold-formed or cold-finished:

    7228.50.10 Of tool steel (other than high-speed steel)

    Other:

    With a maximum cross-sectional dimension of less than <il>18 mm</il>:

    変更後 (2025-7)

    7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:

    7228.50 Other bars and rods, not further worked than cold-formed or cold-finished:

    7228.50.10 Of tool steel (other than high-speed steel)

    Other:

    With a maximum cross-sectional dimension of less than 18 mm:

2025-62025-5と比較公開日 このページ 1件
  1. 7228.50.10.20変更階層・上位説明の記載変更Of round or rectangular cross section with surfaces ground, milled or polished
    7228.50.10.20変更
    2025-52025-6公開日 2025-04-03

    日本語参考訳は未収録です

    Of round or rectangular cross section with surfaces ground, milled or polished

    階層・上位説明の記載変更

    変更前 (2025-5)

    7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:

    7228.50 Other bars and rods, not further worked than cold-formed or cold-finished:

    7228.50.10 Of tool steel (other than high-speed steel)

    Other:

    With a maximum cross-sectional dimension of less than 18 mm:

    変更後 (2025-6)

    7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:

    7228.50 Other bars and rods, not further worked than cold-formed or cold-finished:

    7228.50.10 Of tool steel (other than high-speed steel)

    Other:

    With a maximum cross-sectional dimension of less than <il>18 mm</il>:

2025-52025-4と比較公開日 このページ 1件
  1. 7228.50.10.20変更階層・上位説明の記載変更横断面が円形又は長方形で、表面を研削し、切削し又は研磨したもの
    7228.50.10.20変更
    2025-42025-5公開日 2025-03-14
    参考日本語訳

    横断面が円形又は長方形で、表面を研削し、切削し又は研磨したもの

    分類の条件を見る

    その他の合金鋼のその他の棒、その他の合金鋼の形鋼及び合金鋼又は非合金鋼の中空ドリル棒 ＞ その他の棒（冷間成形又は冷間仕上げをしたものに限るものとし、更に加工したものを除く。） ＞ 工具鋼のもの（高速度鋼を除く。） ＞ その他 ＞ 横断面の最大寸法が18 mm未満のもの ＞ 横断面が円形又は長方形で、表面を研削し、切削し又は研磨したもの

    Of round or rectangular cross section with surfaces ground, milled or polished

    階層・上位説明の記載変更

    変更前 (2025-4)

    7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:

    7228.50 Other bars and rods, not further worked than cold-formed or cold-finished:

    7228.50.10 Of tool steel (other than high-speed steel)

    Other:

    With a maximum cross-sectional dimension of less than <il>18 mm</il>:

    変更後 (2025-5)

    7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:

    7228.50 Other bars and rods, not further worked than cold-formed or cold-finished:

    7228.50.10 Of tool steel (other than high-speed steel)

    Other:

    With a maximum cross-sectional dimension of less than 18 mm:

2025-42025-3と比較公開日 このページ 1件
  1. 7228.50.10.20変更階層・上位説明の記載変更Of round or rectangular cross section with surfaces ground, milled or polished
    7228.50.10.20変更
    2025-32025-4公開日 2025-03-11

    日本語参考訳は未収録です

    Of round or rectangular cross section with surfaces ground, milled or polished

    階層・上位説明の記載変更

    変更前 (2025-3)

    7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:

    7228.50 Other bars and rods, not further worked than cold-formed or cold-finished:

    7228.50.10 Of tool steel (other than high-speed steel)

    Other:

    With a maximum cross-sectional dimension of less than 18 mm:

    変更後 (2025-4)

    7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:

    7228.50 Other bars and rods, not further worked than cold-formed or cold-finished:

    7228.50.10 Of tool steel (other than high-speed steel)

    Other:

    With a maximum cross-sectional dimension of less than <il>18 mm</il>:

公式原文の比較です。税率や適用対象の判断は公式資料をご確認ください。

取得済みの改訂版を順に比較した変更点を表示しています。間の改訂版を取得していない場合は、複数の改訂にまたがる変更をまとめて表示します。各行の「変更前 → 変更後」の版を確認してください。

データ出典：U.S. International Trade Commission（新しいタブ）