本文へ移動
Kanzei米国 / HTSUS

変更履歴

改訂版ごとに、公式原文の変更箇所を比較。

2025-152025-14と比較公開日 このページ 2件
  1. 7601.10.30.00変更商品説明の記載変更全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの
    7601.10.30.00変更
    2025-142025-15公開日 2025-06-20
    参考日本語訳

    全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの

    分類の条件を見る

    アルミニウムの塊 ＞ アルミニウム（合金を除く。） ＞ 全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils

    商品説明の記載変更

    削除追加原文の変更箇所

    変更前 (2025-14)

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils

    変更後 (2025-15)

    参考日本語訳
    アルミニウムの塊 ＞ アルミニウム（合金を除く。） ＞ 全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils
    強調なしの原文を確認
    変更前
    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils
    変更後
    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils
  2. 7601.10.30.00変更階層・上位説明の記載変更全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの
    7601.10.30.00変更
    2025-142025-15公開日 2025-06-20
    参考日本語訳

    全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの

    分類の条件を見る

    アルミニウムの塊 ＞ アルミニウム（合金を除く。） ＞ 全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils

    階層・上位説明の記載変更

    変更前 (2025-14)

    7601 Unwrought aluminum:<nl/>

    7601.10 Aluminum, not alloyed:

    変更後 (2025-15)

    7601 Unwrought aluminum:

    7601.10 Aluminum, not alloyed:

2025-142025-13と比較公開日 このページ 2件
  1. 7601.10.30.00変更商品説明の記載変更Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils
    7601.10.30.00変更
    2025-132025-14公開日 2025-06-06

    日本語参考訳は未収録です

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils

    商品説明の記載変更

    削除追加原文の変更箇所

    変更前 (2025-13)

    参考日本語訳
    アルミニウムの塊 ＞ アルミニウム（合金を除く。） ＞ 全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils

    変更後 (2025-14)

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils
    強調なしの原文を確認
    変更前
    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils
    変更後
    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils
  2. 7601.10.30.00変更階層・上位説明の記載変更Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils
    7601.10.30.00変更
    2025-132025-14公開日 2025-06-06

    日本語参考訳は未収録です

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils

    階層・上位説明の記載変更

    変更前 (2025-13)

    7601 Unwrought aluminum:

    7601.10 Aluminum, not alloyed:

    変更後 (2025-14)

    7601 Unwrought aluminum:<nl/>

    7601.10 Aluminum, not alloyed:

2025-112025-10と比較公開日 このページ 2件
  1. 7601.10.30.00変更商品説明の記載変更全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの
    7601.10.30.00変更
    2025-102025-11公開日 2025-05-02
    参考日本語訳

    全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの

    分類の条件を見る

    アルミニウムの塊 ＞ アルミニウム（合金を除く。） ＞ 全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils

    商品説明の記載変更

    削除追加原文の変更箇所

    変更前 (2025-10)

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils

    変更後 (2025-11)

    参考日本語訳
    アルミニウムの塊 ＞ アルミニウム（合金を除く。） ＞ 全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils
    強調なしの原文を確認
    変更前
    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils
    変更後
    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils
  2. 7601.10.30.00変更階層・上位説明の記載変更全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの
    7601.10.30.00変更
    2025-102025-11公開日 2025-05-02
    参考日本語訳

    全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの

    分類の条件を見る

    アルミニウムの塊 ＞ アルミニウム（合金を除く。） ＞ 全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils

    階層・上位説明の記載変更

    変更前 (2025-10)

    7601 Unwrought aluminum:<nl/>

    7601.10 Aluminum, not alloyed:

    変更後 (2025-11)

    7601 Unwrought aluminum:

    7601.10 Aluminum, not alloyed:

2025-102025-9と比較公開日 このページ 2件
  1. 7601.10.30.00変更商品説明の記載変更Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils
    7601.10.30.00変更
    2025-92025-10公開日 2025-04-15

    日本語参考訳は未収録です

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils

    商品説明の記載変更

    削除追加原文の変更箇所

    変更前 (2025-9)

    参考日本語訳
    アルミニウムの塊 ＞ アルミニウム（合金を除く。） ＞ 全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils

    変更後 (2025-10)

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils
    強調なしの原文を確認
    変更前
    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils
    変更後
    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils
  2. 7601.10.30.00変更階層・上位説明の記載変更Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils
    7601.10.30.00変更
    2025-92025-10公開日 2025-04-15

    日本語参考訳は未収録です

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils

    階層・上位説明の記載変更

    変更前 (2025-9)

    7601 Unwrought aluminum:

    7601.10 Aluminum, not alloyed:

    変更後 (2025-10)

    7601 Unwrought aluminum:<nl/>

    7601.10 Aluminum, not alloyed:

2025-72025-6と比較公開日 このページ 2件
  1. 7601.10.30.00変更商品説明の記載変更全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの
    7601.10.30.00変更
    2025-62025-7公開日 2025-04-04
    参考日本語訳

    全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの

    分類の条件を見る

    アルミニウムの塊 ＞ アルミニウム（合金を除く。） ＞ 全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils

    商品説明の記載変更

    削除追加原文の変更箇所

    変更前 (2025-6)

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils

    変更後 (2025-7)

    参考日本語訳
    アルミニウムの塊 ＞ アルミニウム（合金を除く。） ＞ 全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils
    強調なしの原文を確認
    変更前
    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils
    変更後
    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils
  2. 7601.10.30.00変更階層・上位説明の記載変更全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの
    7601.10.30.00変更
    2025-62025-7公開日 2025-04-04
    参考日本語訳

    全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの

    分類の条件を見る

    アルミニウムの塊 ＞ アルミニウム（合金を除く。） ＞ 全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils

    階層・上位説明の記載変更

    変更前 (2025-6)

    7601 Unwrought aluminum:<nl/>

    7601.10 Aluminum, not alloyed:

    変更後 (2025-7)

    7601 Unwrought aluminum:

    7601.10 Aluminum, not alloyed:

2025-62025-5と比較公開日 このページ 2件
  1. 7601.10.30.00変更商品説明の記載変更Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils
    7601.10.30.00変更
    2025-52025-6公開日 2025-04-03

    日本語参考訳は未収録です

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils

    商品説明の記載変更

    削除追加原文の変更箇所

    変更前 (2025-5)

    参考日本語訳
    アルミニウムの塊 ＞ アルミニウム（合金を除く。） ＞ 全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils

    変更後 (2025-6)

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils
    強調なしの原文を確認
    変更前
    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils
    変更後
    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils
  2. 7601.10.30.00変更階層・上位説明の記載変更Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils
    7601.10.30.00変更
    2025-52025-6公開日 2025-04-03

    日本語参考訳は未収録です

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils

    階層・上位説明の記載変更

    変更前 (2025-5)

    7601 Unwrought aluminum:

    7601.10 Aluminum, not alloyed:

    変更後 (2025-6)

    7601 Unwrought aluminum:<nl/>

    7601.10 Aluminum, not alloyed:

2025-52025-4と比較公開日 このページ 2件
  1. 7601.10.30.00変更商品説明の記載変更全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの
    7601.10.30.00変更
    2025-42025-5公開日 2025-03-14
    参考日本語訳

    全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの

    分類の条件を見る

    アルミニウムの塊 ＞ アルミニウム（合金を除く。） ＞ 全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils

    商品説明の記載変更

    削除追加原文の変更箇所

    変更前 (2025-4)

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils

    変更後 (2025-5)

    参考日本語訳
    アルミニウムの塊 ＞ アルミニウム（合金を除く。） ＞ 全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils
    強調なしの原文を確認
    変更前
    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils
    変更後
    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils
  2. 7601.10.30.00変更階層・上位説明の記載変更全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの
    7601.10.30.00変更
    2025-42025-5公開日 2025-03-14
    参考日本語訳

    全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの

    分類の条件を見る

    アルミニウムの塊 ＞ アルミニウム（合金を除く。） ＞ 全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils

    階層・上位説明の記載変更

    変更前 (2025-4)

    7601 Unwrought aluminum:<nl/>

    7601.10 Aluminum, not alloyed:

    変更後 (2025-5)

    7601 Unwrought aluminum:

    7601.10 Aluminum, not alloyed:

2025-42025-3と比較公開日 このページ 2件
  1. 7601.10.30.00変更商品説明の記載変更Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils
    7601.10.30.00変更
    2025-32025-4公開日 2025-03-11

    日本語参考訳は未収録です

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils

    商品説明の記載変更

    削除追加原文の変更箇所

    変更前 (2025-3)

    参考日本語訳
    アルミニウムの塊 ＞ アルミニウム（合金を除く。） ＞ 全長にわたり横断面が均一で、その最小横断面寸法が9.5 mm以下のコイル状のもの

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils

    変更後 (2025-4)

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils
    強調なしの原文を確認
    変更前
    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils
    変更後
    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils
  2. 7601.10.30.00変更階層・上位説明の記載変更Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils
    7601.10.30.00変更
    2025-32025-4公開日 2025-03-11

    日本語参考訳は未収録です

    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils

    階層・上位説明の記載変更

    変更前 (2025-3)

    7601 Unwrought aluminum:

    7601.10 Aluminum, not alloyed:

    変更後 (2025-4)

    7601 Unwrought aluminum:<nl/>

    7601.10 Aluminum, not alloyed:

公式原文の比較です。税率や適用対象の判断は公式資料をご確認ください。

取得済みの改訂版を順に比較した変更点を表示しています。間の改訂版を取得していない場合は、複数の改訂にまたがる変更をまとめて表示します。各行の「変更前 → 変更後」の版を確認してください。

データ出典：U.S. International Trade Commission（新しいタブ）